Pro+Power Gold PD 5w/40 is a fully synthetic motor oil exceeding the ACEA C3 category for low SAPS (lower levels of Sulphated Ash, Phosphorus and Sulphur) and is recommended for fixed drain service intervals in VW, Audi, Skoda, Seat and Ford engines fitted with PD (Pumpe Duse) unit injectors and other motor manufacturers requiring the same high quality motor oil. Fully synthetic.
O Suitable for vehicles with diesel particulate filters.
O Combines maximum performance with improved fuel efficiency.
OLow sulphur and phosphorous content reduces poisoning of catalytic converters.
O Essential to maintain the emission compliance of the vehicle, in accordance
with the OEM recommendations.
OProvides superior engine cleanliness when compared with conventional PD motor oils.
Recommended By Pro Power Gold Lubricants For Applications Requiring;
VW 502.00, 505.00, 505.01
Mercedes Benz 226.50
Mercedes Benz 229.31, 229.51
FORD WSS M2C 917A
Conventional motor oils produce high levels of ash when burnt in the combustion chamber. This ash may poison catalytic converters and become trapped in diesel particulate filters causing premature failure and expensive repair. Every batch of our Pro+Power range is subjected to elemental analysis to ensure that levels of all additives including Sulphur and Phosphorus are within limits necessary to provide maximum protection to exhaust after treatment equipment. Only the highest quality motor oils meet these stringent requirements.
There are significant differences between the current ACEA C1, C2, C3 and C4 lower SAPS motor oils causing ACEA, the European Automobile Manufacturers Association, to warn that that these oils may not be suitable in some engines. Always check your vehicle handbook.
Find more information regarding Motor Oil specifications HERE
We describe the tests necessary to produce a high quality Motor Oil HERE